Exhibition Displays

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

Stretch Fabric Walls

Stretch Fabric Walls are made up of two main components: a strong, lightweight, tubular aluminium frame and a printed 260gsm ‘stretch’ fabric cover. Assembly time is approximately 10 minutes. Although this can be performed by one person, in most cases we recommend at least two people to apply the graphic. Graphics fold up and fit in the bag, making these units light and easily transportable. Old graphics can be recycled with other textiles. There is no additional charge for more than one design or artwork for your order, no matter how many walls you are ordering or whether you are ordering single-sided or double-sided stands.

• Lightweight and strong aluminium hardware components.
• Available in curved or straight designs.
• Includes a bespoke-printed graphic (either 2.4m/3m/4m/5m/6m wide for Straight, or 2.4m/3m/6m) for Curved.
• Can be ordered either single-sided or double-sided. Single-sided graphics are finished with a plain white back. Double-sided graphics can be made with the same design on both sides, or a different design on either side at no extra cost.
• Printed on a VUTEk FabriVU 340, resulting in a rich and vibrant finish
• Includes a carry bag that contains the unit hardware for easy portability and transportation.
• Straight frames only: assembly requires one allen key (included).
• The fabric cover is washable and easily changeable. Machine wash at 30° without detergents. Always allow graphics to completely dry before using or storing.
• Additional or replacement graphics are available at a greatly-reduced cost.

Notice

Stretch Fabric Walls are recommended for indoor use only, and are not suitable for outdoor use. Please note, due to the nature of fabrics that are not completely opaque, when these graphics are subject to strong lighting (especially from above or behind), some visibility of the frame through the graphic is possible. To avoid this, we recommend limiting the amount of light above or behind the unit, as well as adjusting the positioning of the unit.

Whilst every effort is made to finish these graphics as accurately and consistently as possible, due to the nature of printing, cutting and finishing fabrics, some material movement and minor imperfections in alignment can be introduced. For this reason, we highly recommend not wrapping continuous or detailed shapes between front and rear graphics.

---

Pop-Up Displays

• Available in five sizes
• Available in Curved or Straight designs
• Includes bespoke-printed graphic (split into panels) on semi-rigid, anti-scratch, light-stop, 500 micron CrystalFlex material
• Magnetic bars come pre-fixed to your printed artwork
• Moulded and wheeled carry case for portability (W: 785mm, H: 990mm, D: 480mm)
• Includes wooden tabletop for carry case
• Includes two halogen lights (only one light for 1×3)
• Supplied ready to use (simple 15-minute setup)
• 12 month manufacturer’s unit warranty
• Carry case graphic available
• Also available as double-sided, straight and straight double-sided
• 3×3 available as part of our Exhibition Combo Pack

Curved Pop-Up Specification

Name	1×3	2×3	3×3	4×3	5×3
Overall Width	1240mm	1930mm	2540mm	3070mm	3430mm
Overall Height	2235mm	2235mm	2235mm	2235mm	2235mm
Overall Depth	306mm	485mm	685mm	960mm	1280mm
Graphic Width	2019mm	2692mm	3365mm	4038mm	4711mm
Graphic Height	2235mm	2235mm	2235mm	2235mm	2235mm
Graphic Panels	3	4	5	6	7
Weight	25kg	27.5kg	30kg	32.5kg	35kg

Straight Pop-Up Specification

Name	1×3	2×3	3×3	4×3	5×3
Overall Width	1240mm	1970mm	2700mm	3435mm	4165mm
Overall Height	2235mm	2235mm	2235mm	2235mm	2235mm
Overall Depth	306mm	306mm	306mm	306mm	306mm
Graphic Width	2079mm	2812mm	3545mm	4278mm	5011mm
Graphic Height	2235mm	2235mm	2235mm	2235mm	2235mm
Graphic Panels	3	4	5	6	7
Weight	25kg	27.5kg	30kg	32.5kg	35kg

SEG Fabric Pop-Ups

SEG Fabric Pop-Ups are the latest generation in lightweight large-format graphic displays. Highly portable and easy-to-setup, they offer maximum impact with minimal fuss. Each unit comes complete with a set of bespoke-printed and professionally-sewn graphics on 210gsm Display Polyester. Straight frame available in 1×3, 2×3, 3×3 or 4×3 sizes.

• Aluminium frame
• Three-piece graphic included for single-sided units; four piece graphic included for double-sided units
• Carry bag
• Stabilising feet for uneven floors included
• Guarantee: 12 months
• Setup time: 15 mins
• People required for setup: 1
• Can be joined together to create extended, right-angled and any formation of units (please ask for full details)
• LED lights available as an optional extra (in packs of two)
• Please see Notice before ordering

Specification

Name	1×3 Straight	2×3 Straight	3×3 Straight	4×3 Straight
Overall Width	770mm	1505mm	2240mm	2970mm
Overall Height	2235mm	2235mm	2235mm	2235mm
Overall Depth	340mm	340mm	340mm	340mm
Graphic Panels	3	3	3	3

Impact Hop-Ups

The Impact Hop-Up fabric display systems are lightweight large-format graphic displays designed for quick deployment. Highly portable and easy to setup, offering maximum impact and minimal fuss with a straight frame and an attached printed fabric seam-free graphic. Straight frame available in 2×3, 3×3, 4×3 or 5×3 sizes, each with a three-sided graphic. Replacement graphics are available at a greatly-reduced cost.

• Aluminium frame
• Seam-free three-sided fabric graphic attached to frame with velcro pads
• Carry bag
• Options include lights, and stabilising feet for uneven floors
• Guarantee: 12 months
• Setup time: 3 mins
• People required: 1

---

Stretch Fabric Snake Stands

An ultra-stylish alternative to the traditional display products. Available in two shapes and supplied with dye sublimation printed stretch graphics. The 260gsm ‘stretch’ fabric cover is designed to fit snugly over the frame. It is then secured at the bottom with a zip fastening to maintain tension. The fabric graphic folds up and fits in the bag making these units light and easily transportable. There is no additional charge for more than one design or artwork for your order, no matter how many stands you are ordering or whether you are ordering single-sided or double-sided stands.

• Lightweight and strong aluminium hardware components
• Includes a bespoke-printed graphic
• Can be ordered either single-sided or double-sided. Single-sided graphics are finished with a plain white back. Double-sided graphics can be made with the same design on both sides, or a different design on either side at no extra cost
• Bespoke-printed graphic on Stretch Fabric
• Printed on a VUTEk FabriVU 340, resulting in a rich and vibrant finish
• Very easy for one person to assemble in 5-6 minutes
• Includes a carry bag that contains the unit hardware and can also hold the graphic for easy portability and transportation
• The fabric cover is washable and easily changeable
• Additional or replacement graphics can be ordered separately
• Old graphics can recycled with other textiles
• Measurements for Snake Stands

---

Stretch Fabric Economy Stands

Stretch Fabric stands are made up of two main components: a strong, lightweight, tubular aluminium frame and a printed fabric cover. The 260gsm ‘stretch’ fabric cover is printed on the front with a white reverse as standard (can be printed double-sided) and is designed to fit snugly over the frame. It is then secured at the bottom with a zip fastening to maintain tension. There is no additional charge for more than one design or artwork for your order, no matter how many kits you are ordering or whether you are ordering single-sided or double-sided kits.

• Lightweight and strong aluminium hardware components
• Includes a bespoke-printed graphic
• Can be ordered either single-sided or double-sided. Single-sided graphics are finished with a plain white back. Double-sided graphics can be made with the same design on both sides, or a different design on either side at no extra cost
• Bespoke-printed graphic on Stretch Fabric
• Printed on a VUTEk FabriVU 340, resulting in a rich and vibrant finish
• Very easy for one person to assemble in 5-6 minutes
• Includes a carry bag that contains the unit hardware and can also hold the graphic for easy portability and transportation
• The fabric cover is washable and easily changeable
• Additional or replacement graphics can be ordered separately
• Old graphics can recycled with other textiles
• Measurements for Economy Stands

---

Stretch Fabric Premium Stands

Stretch Fabric stands are made up of two main components: a strong, lightweight, tubular aluminium frame and a printed fabric cover.

• Lightweight and strong aluminium hardware components
• Includes a bespoke-printed graphic (either 600mm/800mm/900mm/1000mm/1200mm/1500mm wide)
• Can be ordered either single-sided or double-sided. Single-sided graphics are finished with a plain white back. Double-sided graphics can be made with the same design on both sides, or a different design on either side at no extra cost
• Bespoke-printed graphic on 260gsm Stretch Fabric
• Printed on a VUTEk FabriVU 340, resulting in a rich and vibrant finish
• Very easy for one person to assemble in 5-6 minutes
• Includes a carry bag that contains the unit hardware and can also hold the graphic for easy portability and transportation
• The fabric cover is washable and easily changeable
• Additional or replacement graphics can be ordered separately
• Old graphics can recycled with other textiles
• Measurements for Premium Stands

---

SEG Fabric Free-Standing Displays

SEG Fabric Free-Standing Displays consist of an aluminium extrusion frame kit which is fitted with feet. The fabric graphic is printed onto 210gsm Display Polyester with dye sublimation for great image vibrancy, and finished with silicone edging. It is then inserted into the aluminium and tensioned around the edge, resulting in a beautifully-finished and seamless branding solution that is perfect for store displays or exhibitions.

SEG Free-Standing Displays are printed single or double-sided (single-sided prints have blank white graphic for the reverse). For double-sided graphics, you can have the same message both sides or have a different promotional graphic on each side. All frames are supplied in sections and require some easy assembly.

Standard

The Standard SEG Free-Standing Display is a lightweight, affordable off-the-shelf textile alternative to the roller banner. The aluminium extrusion is 40mm thick, making it both lightweight and portable. It comes with its own carry bag and takes just minutes to assemble with no tools necessary. It is available in three sizes:

• 850 x 2000mm
• 1000 x 2000mm
• 1500 x 2000mm

Premium

The Premium SEG Free-Standing Display is available at custom sizes and has a more heavyweight 50mm aluminium extrusion. Assembly is straightforward and requires an allen key, which is supplied. Since the Premium frames can be made to almost any size, please contact us for a complete quote. Set sizes are:

• 2000 x 2000mm
• 3000 x 2000mm
• 3000 x 3000mm

---

Torque Indoor Banner Stands

A superb and more cost-effective alternative to a Pop-Up Exhibition Display. The Torque stand will enable you to have a free standing graphic up to 2400mm wide and 2400mm tall.

• Includes 2400mm × 2400mm bespoke-printed graphic on 440gsm PVC
• Can be supplied with graphic at any size from 1500mm × 1500mm up to 2400mm × 2400mm (please specify if a size other than 2400mm × 2400mm is required)
• Graphic supplied with 40mm diameter pole pockets along top and bottom edges
• Telescopic poles for adjustable height and width
• Quick and easy to assemble (Phillips screwdriver required)
• Carry bag for convenient transportation

As the double-sided version of this product features a double-sided graphic, two separate designs can be supplied (one for each side) at no extra cost (versus one design one both sides).

Specification

Overall Width	Adjustable: 1400mm – 2500mm
Overall Height	Adjustable: 1400mm – 2500mm

SEG Wall Mounted Displays

SEG Fabric Wall-Mounted Displays consist of an aluminium extrusion frame kit which is fitted to a wall. The fabric graphic is printed onto 210gsm Display Polyester with dye sublimation for great image vibrancy, and finished with silicone edging. It is then inserted into the aluminium and tensioned around the edge, resulting in a beautifully-finished and seamless branding solution that is perfect for store displays, office dispalys or exhibitions. Replacement graphics are available. Frames use a 17mm super lightweight single-sided profile for internal use with a 2mm aluminium all-depth fitting. Frames come in sections and require some assembly with an allen key (included). They can be ordered in almost any size, so contact us for a complete quote.

What You Get

• Aluminium frame components
• Allen key
• 1 dye-sublimation printed graphic
• 1 year warranty (30 day full-warranty, ‘return-to-base warranty’ thereafter)
• Set sizes available

---

SEG Wall Mounted Lightboxes

Wall-mounted backlit tension fabric systems are similar to their free-standing counterpart, in that they consist of an aluminium extrusion frame kit. The frame is 75mm thick for the standard and 60mm thick for the premium, and is fitted to the wall. A fabric graphic, printed dye-sublimation onto 310gsm Backlit Polyester for great image vibrancy and finished with a silicone edging (kedar), is then slotted into the aluminium channel and tensioned around the edge. The result is a beautifully-finished and seamless branding solution that is perfect for store displays or exhibitions.

Differences between premium and standard are based around the lumens, quality and number of LEDs used. Wall-mounted Lightboxes are edge-lit, which means the LED lights are located around the inside edge. Premium Lightboxes have lights along the long edges for better light quality. Premium Lightboxes can also be provided with a backlit board for larger displays but this is additional cost and does require some skilled installation. Lightboxes are supplies in sections and require some assembly with an allen key (provided). Premium Lightboxes can be requested at bespoke sizes and larger than show here – please ask us for a quotation. Please be aware that edge-lit Lightboxes work best with busy, vibrant designs. Plain and single-colour designs can highlight lighting anomalies.

What You Get

• Aluminium frame components
• LED lights (already attached to the inside of the frame)
• UK power cable with transformer and fitted plug
• Allen key
• 1 × dye-sublimation printed graphic, printed with a FabriVU 340 which gives a rich, vibrant finish
• Power cable is approximately 3m. If you require a different length, please enquire.
• 1 year warranty (30 day full-warranty, ‘return-to-base warranty’ thereafter)

---

SEG Free-Standing Lightboxes

Free-standing backlit tension fabric systems are similar to their wall-mounted counterpart, in that they consist of an aluminium extrusion frame kit. However, the free-standing versions come with a thicker extrusion (100mm for the standard and 120mm for the premium) and stabilising feet. A fabric graphic, printed dye-sublimation onto 310gsm Backlit Polyester for great image vibrancy and finished with a silicone edging (kedar), is then slotted into the aluminium channel and tensioned around the edge. The result is a beautifully-finished and seamless branding solution that is perfect for store displays or exhibitions. Our SEG Fabric Free-Standing Lightboxes are provided with two graphics as standard, due to the Lightboxes being double-sided. You can have the same message both sides or have two different promotional graphics.

Differences between premium and standard are based around the lumens, quality and number of LEDs used. Free-Standing Lightboxes are edge-lit, which means the LED lights are located around the inside edge. Premium Lightboxes have lights along the long edges for better light quality. Premium Lightboxes can also be provided with a backlit board for larger displays but this is additional cost and does require some skilled installation. Lightboxes are supplies in sections and require some assembly with an allen key (provided). Premium Lightboxes can be requested at bespoke sizes and larger than show here – please ask us for a quotation. Please be aware that edge-lit Lightboxes work best with busy, vibrant designs. Plain and single-colour designs can highlight lighting anomalies.

What You Get

• Aluminium frame components
• LED lights (already attached to the inside of the frame)
• UK power cable with transformer and fitted plug
• Allen key
• 2 × dye-sublimation printed graphics, printed with a FabriVU 340 which gives a rich, vibrant finish
• Power cable is approximately 3m. If you require a different length, please enquire.
• 1 year warranty (30 day full-warranty, ‘return-to-base warranty’ thereafter)

---

Xscape Tension Stands

• Includes bespoke-printed graphic printed on 400gsm anti-curl, anti-scuff, anti-glare SoFlat
• Replacement graphics available
• Quick and easy to assemble
• Lightweight X tension system
• Graphic is mounted utilising a simple eyelet system
• Rubber non-slip feet
• Premium carry bag

The Xscape is a great portable indoor banner display unit. The tension system provides the required impact for the majority of your retail and presentation needs. Although the Xscape does have a larger footprint than roller banners and does require a little more assembly, it does have the advantage that the graphic in this unit is easily changed making it extremely cost-effective in the long-term. The graphics for the Xscape are printed on the same 400gsm SoFlat material that we use in our roller banners, so you know you are getting the same durability and light-stop characteristics as you would with a roller banner. The whole system is lightweight and comes with its own carry bag making it very easy to transport.

Available in 3 sizes:

• Small: 600 x 1600mm
• Medium: 800 x 1800mm
• Large: 1200 x 2000mm

---

Tornado Outdoor Counter

The Tornado is constructed from a lightweight frame with tambour graphic wrap, making it a very portable promotions counter. Additional features such as support poles and header panel give a brilliant finish and high visibility. The hollow base can be filled with water or sand to make it stable and secure in outdoor environments.

• Base graphic printed on 440gsm PVC with no splits or breaks
• Base graphic and base supplied with pre-fitted Velcro strips for easy assembly
• Header graphic printed on Self-Adhesive Vinyl applied to 5mm Foamex
• Suitable for indoor or outdoor use
• Hollow base can be filled with water or sand for outdoor stability
• Constructed from moulded HDPE and PVC tambour
• Weatherproof, robust and durable
• Moulded top has pen recess and water drainage notches

Specification

Overall Width	850mm
Overall Height	2050mm
Height To Counter	1260mm
Overall Depth	500mm
Header Graphic Size	770mm (W) × 290mm (H)
Base Graphic Size	2130mm (W) × 870mm (H)
Weight	17kg
Guarantee	12 months

Counta Indoor Stands

Counta is an extremely cost-effective demonstrator unit that is lightweight, portable and simple to assemble. The header and base are branded using self-adhesive vinyl to give a vibrant and hard-wearing finish. The unit header and base come complete with your fitted graphics, in a carry bag and ready to put together out of the box. The base graphic is comprised of one wide graphic split into three pieces (left side, center and right side).

Specification

Overall Width	810mm
Overall Height	2080mm
Height To Counter	860mm
Overall Depth	470mm
Header Graphic Size	770mm (W) × 290mm (H)
Base Graphic Size	1567mm (W) × 844mm (H)
Colour	White
Set-Up Time	5-10 mins
Guarantee	12 months

Pop-Up Tower

• Round Pop-Up Tower with two height options.
• Guarantee: 12 months
• Setup time: 15 mins
• People required: 1-2

Specification

Name	3 Quad	4 Quad
Overall Height	2225mm	2978mm
Diameter	640mm	640mm
Graphic Width	2019mm	2019mm
Graphic Height	2235mm	2978mm
Graphic Panels	3	3

Pop-Up Counters

Includes bespoke-printed graphic on semi-rigid, anti-scratch, light-stop, 500 micron CrystalFlex material. Quick and simple self-locking magnetic assembly. Thermoformed tabletop in beech effect with one internal shelf.

• Supplied with a carry bag
• Setup time: 5 mins
• People required: 1
• Guarantee: 12 months

Specification

Name	1×2	2×2
Overall Width	670mm	1260mm
Overall Height	970mm	970mm
Overall Depth	430mm	430mm
Graphic Width	1510mm	2010mm
Graphic Height	940mm	940mm

SEG Pop-Up Counters

A great counter to complement the SEG Pop-Up range. Easy to transport and set-up, they offer maximum impact with minimal fuss. Each unit comes with a bespoke-printed and professionally-sewn graphic on our 210gsm Display Polyester.

• Aluminium frame
• Single-piece graphic included
• Beech counter top included
• Carry bag included
• Guarantee: 12 months
• Setup time: 5 mins
• People required: 1

---

Stretch Fabric Counters

Stretch Fabric Counters consist of four strong, lightweight, tubular aluminium poles, counter-top and base, and a printed fabric cover. The 260gsm ‘stretch’ fabric cover is designed to fit snugly over the counter-top and base. It is then tensioned by securing the silicone edge in the grooves of the counter-top and base. After the graphic has been applied, the result is a seamless look, with the inside of the unit completely hidden from all angles.

The inside of the unit is hollow, and as an example, can be used for storage of marketing material at an exhibition. Access is only via placing the counter from above. Easy for one person to assemble in 7-10 minutes.

The graphics have a rich and vibrant finish which is excellent for exhibition and indoor displays. Graphics fold up and fit in the carry bag, making these units light and easily transportable. The fabric cover is washable and easily changeable. Additional or replacement graphics can be ordered separately. Old graphics can be recycled with other textiles.

• Lightweight and strong aluminium hardware components.
• Includes a bespoke-printed graphic on Stretch Fabric.
• Includes a carry bag that contains the unit hardware and can also hold the graphic for easy portability and transportation.
• No additional charge for more than one design or artwork for your order, no matter how many counters you are ordering
• Reduced cost replacement graphics available

Specification

Name	Rectangle Counter
Overall Width	800mm
Overall Height	1005mm
Overall Depth	530mm
Weight	10.5kg

Pop-Up Carry Case Graphic

• Bespoke-printed graphic on semi-rigid, anti-scratch, light-stop, 500 micron CrystalFlex material
• Graphic supplied ready to use with velcro fixings
• Graphic can be rolled and stored inside carry case
• CASE AND WOODEN TOP NOT INCLUDED

The Pop-Up Carry Case Graphic is designed to transform the carry case supplied with each Pop-Up into a fully-fledged podium. The graphic is printed on the same material as the Pop-Ups themselves so it offers the same quality and durability.

Specification

Graphic Width	1820mm
Graphic Height	795mm

Exhibition Combo Pack

This Exhibition Combo Pack gives you everything you need for an exhibition in one package.

• 3×3 Pop-Up single-sided display stand and graphic (either curved or straight)
• Carry case graphic
• 2 × Raptor Roller Banners with graphics
• Literature stand

---

Economy Café Barriers

• Steel components with powder-coated black finish
• 350mm diameter base
• Includes 1360mm-wide graphic (printed either single-sided or double-sided)
• Bespoke-printed graphic on Display Polyester
• Either full kits or extension kits available. Full kits include two posts and two bases, and can stand alone. Extension kits include one post and one base, and must be joined to another post
• Both single-sided and double-sided graphics include a pole pocket along the top, with eyelets in the bottom corners
• Supplied with a cross bar for the top of the graphic, and spring clips for the bottom corners of the graphic
• Double-sided graphics are finished with a blockout lining between sides to prevent light show-through
• Double-sided graphics are finished with no visible horizontal stitching for a more seamless look than many other Café Barriers. This allows a design to make more effective use of the entire printed area
• Each post collar allows the connection of four rails. This allows barriers to be joined at right angles (narrower angles are also possible)
• Non-slip and non-marking plastic ring underneath the base to prevent damage to floors
• Each unit and graphic can be assembled and fitted in minutes, with no tools required
• Suitable for both outdoor and indoor use

Whereas many suppliers use a lower-quality PVC banner material for Café Barriers, we use a high-quality Display Polyester. There is no additional charge for more than one design or artwork for your order, no matter how many kits you are ordering or whether you are ordering single-sided or double-sided kits. If you would prefer chrome-finished or 2m-wide Café Barriers, please see our Deluxe Café Barriers.

What You Get

Full Kit Contents:

• Two bases
• Two vertical posts
• One horizontal bar
• Two spring clips
• Bespoke-printed graphic (either single-sided or double-sided)

Extension Kit Contents:

• One base
• One vertical post
• One horizontal bar
• Two spring clips
• Bespoke-printed graphic (either single-sided or double-sided)

---

Deluxe Café Barriers

• Stainless steel components with chrome finish
• 350mm diameter base
• Includes bespoke-printed graphic (either 1360mm/1860mm wide and printed either single-sided or double-sided)
• Bespoke-printed graphic on Display Polyester
• Either full kits or extension kits available. Full kits include two posts and two bases, and can stand alone. Extension kits include one post and one base, and must be joined to another post
• Both single-sided and double-sided graphics include a pole pocket along the top and a pole pocket along the bottom
• Each kit is supplied with two cross bars
• Double-sided graphics are finished with a blockout lining between sides to prevent light show-through
• Double-sided graphics are finished with no visible horizontal stitching for a more seamless look than many other Café Barriers. This allows a design to make more effective use of the entire printed area
• Each post collar allows the connection of four rails. This allows barriers to be joined at right angles (narrower angles are also possible)
• Non-slip and non-marking plastic ring underneath the base to prevent damage to floors
• Each unit and graphic can be assembled and fitted in minutes, with no tools required
• Suitable for both outdoor and indoor use

Whereas many suppliers use a lower-quality PVC banner material for Café Barriers, we use a high-quality Display Polyester. There is no additional charge for more than one design or artwork for your order, no matter how many kits you are ordering or whether you are ordering single-sided or double-sided kits. If you would prefer black-finished Café Barriers, please see our Economy Café Barriers.

What You Get

Full Kit Contents:

• Two bases
• Two vertical posts
• Two horizontal bars
• Bespoke-printed graphic (either single-sided or double-sided)

Extension Kit Contents:

• One base
• One vertical post
• Two horizontal bars
• Bespoke-printed graphic (either single-sided or double-sided)

---

Literature Stands

• High tech styling with A4 capacity shelving
• 6 double-sided acrylic shelves
• Folds down for easy transportation
• Anodised silver
• Complete with heavy-duty hard case for safe transportation
• Shelf lip holds 23mm of sheets

Also available as part of our Exhibition Combo Pack.

Specification

Overall Width	256mm
Overall Height	1460mm
Overall Depth	370mm
Weight	7.5kg

Tablecloths

• Printed on 210gsm Display Polyester
• Finished with a standard 10mm hem all around
• Dye-sublimation printed for vibrant colours and images
• Each tablecloth is printed to your requirements
• M1/B1 fire-rated to comply with UK and European fire safety standards
• Standard finishing included at no extra charge
• Approx maximum finished graphic width: 3000mm (depending on chosen finish)
• Roll width: 3200mm

Display Polyester Tablecloths are printed via a process of dye-sublimation which uses special inks and undergo a post-print heating process to ‘fix’ the ink into the fabric. This makes it both scuff-resistant and washable.

Tablecloth Drop Length

You will need to know the amount of ‘drop length’ (also known as ‘overhang’) required from the edge of the table. This is the amount that the tablecloth will hang from the edge of the table down towards the floor. For most situations, and especially where people will be sitting at a table, a 150mm to 200mm drop length is fine. For a longer drop length, such as the front of a table at a convention or expo, we recommend going much closer to the floor. The greater drop length grants more privacy as well as a larger area for branding. For certain situations, a short drop length may be required at the back of the table, while a full-height drop length is required for the front and sides. Please bear this in mind when calculating your tablecloth size. Please don’t hesitate to contact us for help calculating your sizes.

---

Accessories

The LED Flood Light is the stylish and economical way to illuminate the SEG Fabric Pop-Ups. Don’t let the compact design fool you – this small LED light is capable of producing 1200 lumen but only consumes a small amount of energy, making it far more efficient than halogen equivalents. The LED Flood Light design allows the lights to be daisy-chained from a single transformer (up to a maximum of five). There is no need for extra transformers – just link them together with the included linking cables. One linking cable is supplied with each twin pack.

• Low Voltage
• 5631 Kelvin
• Linkable (maximum of five lights in one chain)
• Up to four times more efficient than halogen lights
• Up to 22,000 hours of use

Corner Linking Clamps

Please note, the corner linking clamps are not compatible with units utilising graphics on both sides (double-sided).

SEG Finishing Tool

Hand-held tool to aid tidying and finishing of all Silicon Edge Graphics. When applying Silicon Edge Graphics to products and frames, an untidy edge can become visible. This is caused by excess material being folded back on itself in the groove of the frame. This tool allows for quick and easy correction of this excess material, by pushing the excess material back into the groove.

Recommended for use with:

• SEG Fabric Pop-Ups
• SEG Fabric Pop-Up Counter
• SEG Fabric Free-Standing Lightboxes
• SEG Fabric Wall-Mounted Lightboxes

Can also be used for bespoke Silicon Edge Graphics printed on Display Polyester and Backlit Polyester.